keymap.h

Go to the documentation of this file.

#ifndef NVIM_KEYMAP_H
#define NVIM_KEYMAP_H

#include "nvim/strings.h"

/*
 * Keycode definitions for special keys.
 *
 * Any special key code sequences are replaced by these codes.
 */

/*
 * For MSDOS some keys produce codes larger than 0xff. They are split into two
 * chars, the first one is K_NUL.
 */
#define K_NUL                   (0xce)  /* for MSDOS: special key follows */

/*
 * K_SPECIAL is the first byte of a special key code and is always followed by
 * two bytes.
 * The second byte can have any value. ASCII is used for normal termcap
 * entries, 0x80 and higher for special keys, see below.
 * The third byte is guaranteed to be between 0x02 and 0x7f.
 */

#define K_SPECIAL               (0x80)

/*
 * Positive characters are "normal" characters.
 * Negative characters are special key codes.  Only characters below -0x200
 * are used to so that the absolute value can't be mistaken for a single-byte
 * character.
 */
#define IS_SPECIAL(c)           ((c) < 0)

/*
 * Characters 0x0100 - 0x01ff have a special meaning for abbreviations.
 * Multi-byte characters also have ABBR_OFF added, thus are above 0x0200.
 */
#define ABBR_OFF                0x100

/*
 * NUL cannot be in the input string, therefore it is replaced by
 *  K_SPECIAL   KS_ZERO KE_FILLER
 */
#define KS_ZERO                 255

/*
 * K_SPECIAL cannot be in the input string, therefore it is replaced by
 *  K_SPECIAL   KS_SPECIAL  KE_FILLER
 */
#define KS_SPECIAL              254

/*
 * KS_EXTRA is used for keys that have no termcap name
 *  K_SPECIAL   KS_EXTRA    KE_xxx
 */
#define KS_EXTRA                253

/*
 * KS_MODIFIER is used when a modifier is given for a (special) key
 *  K_SPECIAL   KS_MODIFIER bitmask
 */
#define KS_MODIFIER             252

/*
 * These are used for the GUI
 *  K_SPECIAL   KS_xxx  KE_FILLER
 */
#define KS_MOUSE                251
#define KS_MENU                 250
#define KS_VER_SCROLLBAR        249
#define KS_HOR_SCROLLBAR        248

/*
 * Used for switching Select mode back on after a mapping or menu.
 */
#define KS_SELECT               245
#define K_SELECT_STRING         (char_u *)"\200\365X"

/* Used a termcap entry that produces a normal character. */
#define KS_KEY                  242

/* Used for click in a tab pages label. */
#define KS_TABLINE              240

/* Used for menu in a tab pages line. */
#define KS_TABMENU              239

/*
 * Filler used after KS_SPECIAL and others
 */
#define KE_FILLER               ('X')

/*
 * translation of three byte code "K_SPECIAL a b" into int "K_xxx" and back
 */
#define TERMCAP2KEY(a, b)       (-((a) + ((int)(b) << 8)))
#define KEY2TERMCAP0(x)         ((-(x)) & 0xff)
#define KEY2TERMCAP1(x)         (((unsigned)(-(x)) >> 8) & 0xff)

/*
 * get second or third byte when translating special key code into three bytes
 */
#define K_SECOND(c)     ((c) == K_SPECIAL ? KS_SPECIAL : (c) == \
                         NUL ? KS_ZERO : KEY2TERMCAP0(c))

#define K_THIRD(c)      (((c) == K_SPECIAL || (c) == \
                          NUL) ? KE_FILLER : KEY2TERMCAP1(c))

/*
 * get single int code from second byte after K_SPECIAL
 */
#define TO_SPECIAL(a, b)    ((a) == KS_SPECIAL ? K_SPECIAL : (a) == \
                             KS_ZERO ? K_ZERO : TERMCAP2KEY(a, b))

// Codes for keys that do not have a termcap name.
// The numbers are fixed to make sure that recorded key sequences remain valid.
// Add new entries at the end, not halfway.
//
// K_SPECIAL KS_EXTRA KE_xxx
//
// Entries must be in the range 0x02-0x7f (see comment at K_SPECIAL).
enum key_extra {
  KE_NAME = 3                 // name of this terminal entry

  , KE_S_UP = 4               // shift-up
  , KE_S_DOWN = 5             // shift-down

  , KE_S_F1 = 6               // shifted function keys
  , KE_S_F2 = 7
  , KE_S_F3 = 8
  , KE_S_F4 = 9
  , KE_S_F5 = 10
  , KE_S_F6 = 11
  , KE_S_F7 = 12
  , KE_S_F8 = 13
  , KE_S_F9 = 14
  , KE_S_F10 = 15

  , KE_S_F11 = 16
  , KE_S_F12 = 17
  , KE_S_F13 = 18
  , KE_S_F14 = 19
  , KE_S_F15 = 20
  , KE_S_F16 = 21
  , KE_S_F17 = 22
  , KE_S_F18 = 23
  , KE_S_F19 = 24
  , KE_S_F20 = 25

  , KE_S_F21 = 26
  , KE_S_F22 = 27
  , KE_S_F23 = 28
  , KE_S_F24 = 29
  , KE_S_F25 = 30
  , KE_S_F26 = 31
  , KE_S_F27 = 32
  , KE_S_F28 = 33
  , KE_S_F29 = 34
  , KE_S_F30 = 35

  , KE_S_F31 = 36
  , KE_S_F32 = 37
  , KE_S_F33 = 38
  , KE_S_F34 = 39
  , KE_S_F35 = 40
  , KE_S_F36 = 41
  , KE_S_F37 = 42

  , KE_MOUSE = 43             // mouse event start

  // Symbols for pseudo keys which are translated from the real key symbols
  // above.
  , KE_LEFTMOUSE = 44         // Left mouse button click
  , KE_LEFTDRAG = 45          // Drag with left mouse button down
  , KE_LEFTRELEASE = 46       // Left mouse button release
  , KE_MIDDLEMOUSE = 47       // Middle mouse button click
  , KE_MIDDLEDRAG = 48        // Drag with middle mouse button down
  , KE_MIDDLERELEASE = 49     // Middle mouse button release
  , KE_RIGHTMOUSE = 50        // Right mouse button click
  , KE_RIGHTDRAG = 51         // Drag with right mouse button down
  , KE_RIGHTRELEASE = 52      // Right mouse button release

  , KE_IGNORE = 53            // Ignored mouse drag/release

  , KE_TAB = 54               // unshifted TAB key
  , KE_S_TAB_OLD = 55         // shifted TAB key (no longer used)

  // , KE_SNIFF_UNUSED = 56   // obsolete
  , KE_XF1 = 57               // extra vt100 function keys for xterm
  , KE_XF2 = 58
  , KE_XF3 = 59
  , KE_XF4 = 60
  , KE_XEND = 61              // extra (vt100) end key for xterm
  , KE_ZEND = 62              // extra (vt100) end key for xterm
  , KE_XHOME = 63             // extra (vt100) home key for xterm
  , KE_ZHOME = 64             // extra (vt100) home key for xterm
  , KE_XUP = 65               // extra vt100 cursor keys for xterm
  , KE_XDOWN = 66
  , KE_XLEFT = 67
  , KE_XRIGHT = 68

  , KE_LEFTMOUSE_NM = 69      // non-mappable Left mouse button click
  , KE_LEFTRELEASE_NM = 70    // non-mappable left mouse button release

  , KE_S_XF1 = 71             // vt100 shifted function keys for xterm
  , KE_S_XF2 = 72
  , KE_S_XF3 = 73
  , KE_S_XF4 = 74

  // NOTE: The scroll wheel events are inverted: i.e. UP is the same as
  // moving the actual scroll wheel down, LEFT is the same as moving the
  // scroll wheel right.
  , KE_MOUSEDOWN = 75         // scroll wheel pseudo-button Down
  , KE_MOUSEUP = 76           // scroll wheel pseudo-button Up
  , KE_MOUSELEFT = 77         // scroll wheel pseudo-button Left
  , KE_MOUSERIGHT = 78        // scroll wheel pseudo-button Right

  , KE_KINS = 79              // keypad Insert key
  , KE_KDEL = 80              // keypad Delete key

  , KE_CSI = 81               // CSI typed directly
  , KE_SNR = 82               // <SNR>
  , KE_PLUG = 83              // <Plug>
  , KE_CMDWIN = 84            // open command-line window from Command-line Mode

  , KE_C_LEFT = 85            // control-left
  , KE_C_RIGHT = 86           // control-right
  , KE_C_HOME = 87            // control-home
  , KE_C_END = 88             // control-end

  , KE_X1MOUSE = 89           // X1/X2 mouse-buttons
  , KE_X1DRAG = 90
  , KE_X1RELEASE = 91
  , KE_X2MOUSE = 92
  , KE_X2DRAG = 93
  , KE_X2RELEASE = 94

  , KE_DROP = 95              // DnD data is available
  // , KE_CURSORHOLD = 96     // CursorHold event
  , KE_NOP = 97               // no-op: does nothing
  , KE_FOCUSGAINED = 98       // focus gained
  , KE_FOCUSLOST = 99         // focus lost
  // , KE_MOUSEMOVE = 100     // mouse moved with no button down
  // , KE_CANCEL = 101        // return from vgetc
  , KE_EVENT = 102            // event
  , KE_COMMAND = 104          // <Cmd> special key
};

/*
 * the three byte codes are replaced with the following int when using vgetc()
 */
#define K_ZERO          TERMCAP2KEY(KS_ZERO, KE_FILLER)

#define K_UP            TERMCAP2KEY('k', 'u')
#define K_KUP           TERMCAP2KEY('K', 'u')   // keypad up
#define K_DOWN          TERMCAP2KEY('k', 'd')
#define K_KDOWN         TERMCAP2KEY('K', 'd')   // keypad down
#define K_LEFT          TERMCAP2KEY('k', 'l')
#define K_KLEFT         TERMCAP2KEY('K', 'l')   // keypad left
#define K_RIGHT         TERMCAP2KEY('k', 'r')
#define K_KRIGHT        TERMCAP2KEY('K', 'r')   // keypad right
#define K_S_UP          TERMCAP2KEY(KS_EXTRA, KE_S_UP)
#define K_S_DOWN        TERMCAP2KEY(KS_EXTRA, KE_S_DOWN)
#define K_S_LEFT        TERMCAP2KEY('#', '4')
#define K_C_LEFT        TERMCAP2KEY(KS_EXTRA, KE_C_LEFT)
#define K_S_RIGHT       TERMCAP2KEY('%', 'i')
#define K_C_RIGHT       TERMCAP2KEY(KS_EXTRA, KE_C_RIGHT)
#define K_S_HOME        TERMCAP2KEY('#', '2')
#define K_C_HOME        TERMCAP2KEY(KS_EXTRA, KE_C_HOME)
#define K_S_END         TERMCAP2KEY('*', '7')
#define K_C_END         TERMCAP2KEY(KS_EXTRA, KE_C_END)
#define K_TAB           TERMCAP2KEY(KS_EXTRA, KE_TAB)
#define K_S_TAB         TERMCAP2KEY('k', 'B')

/* extra set of function keys F1-F4, for vt100 compatible xterm */
#define K_XF1           TERMCAP2KEY(KS_EXTRA, KE_XF1)
#define K_XF2           TERMCAP2KEY(KS_EXTRA, KE_XF2)
#define K_XF3           TERMCAP2KEY(KS_EXTRA, KE_XF3)
#define K_XF4           TERMCAP2KEY(KS_EXTRA, KE_XF4)

/* extra set of cursor keys for vt100 compatible xterm */
#define K_XUP           TERMCAP2KEY(KS_EXTRA, KE_XUP)
#define K_XDOWN         TERMCAP2KEY(KS_EXTRA, KE_XDOWN)
#define K_XLEFT         TERMCAP2KEY(KS_EXTRA, KE_XLEFT)
#define K_XRIGHT        TERMCAP2KEY(KS_EXTRA, KE_XRIGHT)

#define K_F1            TERMCAP2KEY('k', '1')   // function keys
#define K_F2            TERMCAP2KEY('k', '2')
#define K_F3            TERMCAP2KEY('k', '3')
#define K_F4            TERMCAP2KEY('k', '4')
#define K_F5            TERMCAP2KEY('k', '5')
#define K_F6            TERMCAP2KEY('k', '6')
#define K_F7            TERMCAP2KEY('k', '7')
#define K_F8            TERMCAP2KEY('k', '8')
#define K_F9            TERMCAP2KEY('k', '9')
#define K_F10           TERMCAP2KEY('k', ';')

#define K_F11           TERMCAP2KEY('F', '1')
#define K_F12           TERMCAP2KEY('F', '2')
#define K_F13           TERMCAP2KEY('F', '3')
#define K_F14           TERMCAP2KEY('F', '4')
#define K_F15           TERMCAP2KEY('F', '5')
#define K_F16           TERMCAP2KEY('F', '6')
#define K_F17           TERMCAP2KEY('F', '7')
#define K_F18           TERMCAP2KEY('F', '8')
#define K_F19           TERMCAP2KEY('F', '9')
#define K_F20           TERMCAP2KEY('F', 'A')

#define K_F21           TERMCAP2KEY('F', 'B')
#define K_F22           TERMCAP2KEY('F', 'C')
#define K_F23           TERMCAP2KEY('F', 'D')
#define K_F24           TERMCAP2KEY('F', 'E')
#define K_F25           TERMCAP2KEY('F', 'F')
#define K_F26           TERMCAP2KEY('F', 'G')
#define K_F27           TERMCAP2KEY('F', 'H')
#define K_F28           TERMCAP2KEY('F', 'I')
#define K_F29           TERMCAP2KEY('F', 'J')
#define K_F30           TERMCAP2KEY('F', 'K')

#define K_F31           TERMCAP2KEY('F', 'L')
#define K_F32           TERMCAP2KEY('F', 'M')
#define K_F33           TERMCAP2KEY('F', 'N')
#define K_F34           TERMCAP2KEY('F', 'O')
#define K_F35           TERMCAP2KEY('F', 'P')
#define K_F36           TERMCAP2KEY('F', 'Q')
#define K_F37           TERMCAP2KEY('F', 'R')

/* extra set of shifted function keys F1-F4, for vt100 compatible xterm */
#define K_S_XF1         TERMCAP2KEY(KS_EXTRA, KE_S_XF1)
#define K_S_XF2         TERMCAP2KEY(KS_EXTRA, KE_S_XF2)
#define K_S_XF3         TERMCAP2KEY(KS_EXTRA, KE_S_XF3)
#define K_S_XF4         TERMCAP2KEY(KS_EXTRA, KE_S_XF4)

#define K_S_F1          TERMCAP2KEY(KS_EXTRA, KE_S_F1)  // shifted func. keys
#define K_S_F2          TERMCAP2KEY(KS_EXTRA, KE_S_F2)
#define K_S_F3          TERMCAP2KEY(KS_EXTRA, KE_S_F3)
#define K_S_F4          TERMCAP2KEY(KS_EXTRA, KE_S_F4)
#define K_S_F5          TERMCAP2KEY(KS_EXTRA, KE_S_F5)
#define K_S_F6          TERMCAP2KEY(KS_EXTRA, KE_S_F6)
#define K_S_F7          TERMCAP2KEY(KS_EXTRA, KE_S_F7)
#define K_S_F8          TERMCAP2KEY(KS_EXTRA, KE_S_F8)
#define K_S_F9          TERMCAP2KEY(KS_EXTRA, KE_S_F9)
#define K_S_F10         TERMCAP2KEY(KS_EXTRA, KE_S_F10)

#define K_S_F11         TERMCAP2KEY(KS_EXTRA, KE_S_F11)
#define K_S_F12         TERMCAP2KEY(KS_EXTRA, KE_S_F12)
/* K_S_F13 to K_S_F37  are currently not used */

#define K_HELP          TERMCAP2KEY('%', '1')
#define K_UNDO          TERMCAP2KEY('&', '8')

#define K_BS            TERMCAP2KEY('k', 'b')

#define K_INS           TERMCAP2KEY('k', 'I')
#define K_KINS          TERMCAP2KEY(KS_EXTRA, KE_KINS)
#define K_DEL           TERMCAP2KEY('k', 'D')
#define K_KDEL          TERMCAP2KEY(KS_EXTRA, KE_KDEL)
#define K_HOME          TERMCAP2KEY('k', 'h')
#define K_KHOME         TERMCAP2KEY('K', '1')   // keypad home (upper left)
#define K_XHOME         TERMCAP2KEY(KS_EXTRA, KE_XHOME)
#define K_ZHOME         TERMCAP2KEY(KS_EXTRA, KE_ZHOME)
#define K_END           TERMCAP2KEY('@', '7')
#define K_KEND          TERMCAP2KEY('K', '4')   // keypad end (lower left)
#define K_XEND          TERMCAP2KEY(KS_EXTRA, KE_XEND)
#define K_ZEND          TERMCAP2KEY(KS_EXTRA, KE_ZEND)
#define K_PAGEUP        TERMCAP2KEY('k', 'P')
#define K_PAGEDOWN      TERMCAP2KEY('k', 'N')
#define K_KPAGEUP       TERMCAP2KEY('K', '3')   // keypad pageup (upper R.)
#define K_KPAGEDOWN     TERMCAP2KEY('K', '5')   // keypad pagedown (lower R.)
#define K_KORIGIN       TERMCAP2KEY('K', '2')   // keypad center

#define K_KPLUS         TERMCAP2KEY('K', '6')   // keypad plus
#define K_KMINUS        TERMCAP2KEY('K', '7')   // keypad minus
#define K_KDIVIDE       TERMCAP2KEY('K', '8')   // keypad /
#define K_KMULTIPLY     TERMCAP2KEY('K', '9')   // keypad *
#define K_KENTER        TERMCAP2KEY('K', 'A')   // keypad Enter
#define K_KPOINT        TERMCAP2KEY('K', 'B')   // keypad . or ,

#define K_K0            TERMCAP2KEY('K', 'C')   // keypad 0
#define K_K1            TERMCAP2KEY('K', 'D')   // keypad 1
#define K_K2            TERMCAP2KEY('K', 'E')   // keypad 2
#define K_K3            TERMCAP2KEY('K', 'F')   // keypad 3
#define K_K4            TERMCAP2KEY('K', 'G')   // keypad 4
#define K_K5            TERMCAP2KEY('K', 'H')   // keypad 5
#define K_K6            TERMCAP2KEY('K', 'I')   // keypad 6
#define K_K7            TERMCAP2KEY('K', 'J')   // keypad 7
#define K_K8            TERMCAP2KEY('K', 'K')   // keypad 8
#define K_K9            TERMCAP2KEY('K', 'L')   // keypad 9

#define K_KCOMMA        TERMCAP2KEY('K', 'M')   // keypad comma
#define K_KEQUAL        TERMCAP2KEY('K', 'N')   // keypad equal

#define K_MOUSE         TERMCAP2KEY(KS_MOUSE, KE_FILLER)
#define K_MENU          TERMCAP2KEY(KS_MENU, KE_FILLER)
#define K_VER_SCROLLBAR TERMCAP2KEY(KS_VER_SCROLLBAR, KE_FILLER)
#define K_HOR_SCROLLBAR   TERMCAP2KEY(KS_HOR_SCROLLBAR, KE_FILLER)

#define K_SELECT        TERMCAP2KEY(KS_SELECT, KE_FILLER)

#define K_TABLINE       TERMCAP2KEY(KS_TABLINE, KE_FILLER)
#define K_TABMENU       TERMCAP2KEY(KS_TABMENU, KE_FILLER)

/*
 * Symbols for pseudo keys which are translated from the real key symbols
 * above.
 */
#define K_LEFTMOUSE     TERMCAP2KEY(KS_EXTRA, KE_LEFTMOUSE)
#define K_LEFTMOUSE_NM  TERMCAP2KEY(KS_EXTRA, KE_LEFTMOUSE_NM)
#define K_LEFTDRAG      TERMCAP2KEY(KS_EXTRA, KE_LEFTDRAG)
#define K_LEFTRELEASE   TERMCAP2KEY(KS_EXTRA, KE_LEFTRELEASE)
#define K_LEFTRELEASE_NM TERMCAP2KEY(KS_EXTRA, KE_LEFTRELEASE_NM)
#define K_MIDDLEMOUSE   TERMCAP2KEY(KS_EXTRA, KE_MIDDLEMOUSE)
#define K_MIDDLEDRAG    TERMCAP2KEY(KS_EXTRA, KE_MIDDLEDRAG)
#define K_MIDDLERELEASE TERMCAP2KEY(KS_EXTRA, KE_MIDDLERELEASE)
#define K_RIGHTMOUSE    TERMCAP2KEY(KS_EXTRA, KE_RIGHTMOUSE)
#define K_RIGHTDRAG     TERMCAP2KEY(KS_EXTRA, KE_RIGHTDRAG)
#define K_RIGHTRELEASE  TERMCAP2KEY(KS_EXTRA, KE_RIGHTRELEASE)
#define K_X1MOUSE       TERMCAP2KEY(KS_EXTRA, KE_X1MOUSE)
#define K_X1MOUSE       TERMCAP2KEY(KS_EXTRA, KE_X1MOUSE)
#define K_X1DRAG        TERMCAP2KEY(KS_EXTRA, KE_X1DRAG)
#define K_X1RELEASE     TERMCAP2KEY(KS_EXTRA, KE_X1RELEASE)
#define K_X2MOUSE       TERMCAP2KEY(KS_EXTRA, KE_X2MOUSE)
#define K_X2DRAG        TERMCAP2KEY(KS_EXTRA, KE_X2DRAG)
#define K_X2RELEASE     TERMCAP2KEY(KS_EXTRA, KE_X2RELEASE)

#define K_IGNORE        TERMCAP2KEY(KS_EXTRA, KE_IGNORE)
#define K_NOP           TERMCAP2KEY(KS_EXTRA, KE_NOP)

#define K_MOUSEDOWN     TERMCAP2KEY(KS_EXTRA, KE_MOUSEDOWN)
#define K_MOUSEUP       TERMCAP2KEY(KS_EXTRA, KE_MOUSEUP)
#define K_MOUSELEFT     TERMCAP2KEY(KS_EXTRA, KE_MOUSELEFT)
#define K_MOUSERIGHT    TERMCAP2KEY(KS_EXTRA, KE_MOUSERIGHT)

#define K_CSI           TERMCAP2KEY(KS_EXTRA, KE_CSI)
#define K_SNR           TERMCAP2KEY(KS_EXTRA, KE_SNR)
#define K_PLUG          TERMCAP2KEY(KS_EXTRA, KE_PLUG)
#define K_CMDWIN        TERMCAP2KEY(KS_EXTRA, KE_CMDWIN)

#define K_DROP          TERMCAP2KEY(KS_EXTRA, KE_DROP)

#define K_EVENT         TERMCAP2KEY(KS_EXTRA, KE_EVENT)
#define K_COMMAND       TERMCAP2KEY(KS_EXTRA, KE_COMMAND)

/* Bits for modifier mask */
/* 0x01 cannot be used, because the modifier must be 0x02 or higher */
#define MOD_MASK_SHIFT      0x02
#define MOD_MASK_CTRL       0x04
#define MOD_MASK_ALT        0x08        // aka META
#define MOD_MASK_META       0x10        // META when it's different from ALT
#define MOD_MASK_2CLICK     0x20        // use MOD_MASK_MULTI_CLICK
#define MOD_MASK_3CLICK     0x40        // use MOD_MASK_MULTI_CLICK
#define MOD_MASK_4CLICK     0x60        // use MOD_MASK_MULTI_CLICK
#define MOD_MASK_CMD        0x80        // "super" key (macOS: command-key)

#define MOD_MASK_MULTI_CLICK    (MOD_MASK_2CLICK|MOD_MASK_3CLICK| \
                                 MOD_MASK_4CLICK)

/*
 * The length of the longest special key name, including modifiers.
 * Current longest is <M-C-S-T-D-A-4-ScrollWheelRight> (length includes '<' and
 * '>').
 */
#define MAX_KEY_NAME_LEN    32

// Maximum length of a special key event as tokens.  This includes modifiers.
// The longest event is something like <M-C-S-T-4-LeftDrag> which would be the
// following string of tokens:
//
// <K_SPECIAL> <KS_MODIFIER> bitmask <K_SPECIAL> <KS_EXTRA> <KE_LEFTDRAG>.
//
// This is a total of 6 tokens, and is currently the longest one possible.
#define MAX_KEY_CODE_LEN    6

#define FLAG_CPO_BSLASH    0x01
#define CPO_TO_CPO_FLAGS   ((vim_strchr(p_cpo, CPO_BSLASH) == NULL) \
                            ? 0 \
                            : FLAG_CPO_BSLASH)

#ifdef INCLUDE_GENERATED_DECLARATIONS
# include "keymap.h.generated.h"
#endif
#endif  // NVIM_KEYMAP_H